Vivitar Vivicam 55 User Manual page 3

IMPORTANT
You should read this first before you start reading this Instruction Menu.
Notice and Request Regarding Instruction Menu and Software.
=======================================================================
1. The contents of the bundle driver, software, design,specifications and Instruction
Menu packaged with this camerapackage are subject to change without notice.
2. The accessories that come with the camera may differ from regions to regions.
3. We are not liable whatsoever for any compensation arising from errors in descrip-
tions in this Instruction Menu.
=======================================================================
WARNING
Do not use this camera if it is emitting smoke, becomes unusually hot to be
touched, emitting any unusual odor or noise, or if it is in any other abnormal
states.
Operating the camera in any of these situations may cause a fire or an electrical
shock.
Stop using the camera immediately, turn the camera off, and then disconnect the
power source (batteries or AC power adapter). (If you are using the AC power
adapter, unplug the adapter from the AC power outlet after you have discon-
nected the camera.)
After checking that smoke is no longer being emitted, contact your dealer or your
local authorized service facility and request repairs. Never attempt to repair this
camera by yourself as this is dangerous.
Do not use the camera if any water has entered the camera.
Turn the camera off, and then disconnect the power source (batteries or AC power
adapter).
(if you are using the AC power adapter, unplug the adapter from the AC power
outlet after you have disconnected the camera.) Then contact your dealer or your
local authorized service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
Do not use the camera if any foreign objects have entered the camera.
Turn the camera off, and then disconnect the power source (batteries or AC power
adapter).
(if you are using the AC power adapter, unplug the adapter from the AC power
outlet after you have disconnected the camera.) Then contact your dealer or your
local authorized service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
If the camera has been dropped or if the camera case has been damaged, turn
the camera off, and then disconnect the power source (batteries or AC power
adapter). (if you are using the AC power adapter, unplug the adapter from the AC
EN-2