ADTRAN 3G CDMA NIM Configuration Manual page 31

3G CDMA NIM/Cellular Interface
2. Specify the primary home agent address using the custom-profile primary-ha-address <ip address>
command. Enter the IP address in dotted decimal notation (XX.XX.XX.XX). Using the no form of this
command removes the primary address. Enter the command from the cellular interface configuration
prompt as follows:
(config-cellular 1/1)#custom-profile primary-ha-address XX.XX.XX.XX
3. Specify the secondary home agent address using the custom-profile secondary-ha-address
<ip address> command. Enter the IP address in dotted decimal notation (XX.XX.XX.XX). Using the
no form of this command removes the secondary address. Enter the command from the cellular interface
configuration prompt as follows:
(config-cellular 1/1)#custom-profile secondary-ha-address XX.XX.XX.XX
4. Specify the custom home agent shared secret using either the custom-profile ha-shared-secret ascii
<shared secret> command or the custom-profile ha-shared secret hexadecimal <shared secret>
command. The first command uses a plain text secret, and the second uses a hexadecimal secret. The
shared secret can be up to 16 characters long. Using the no form of this command removes the shared
secret from the custom profile configuration. Enter either command from the cellular interface
configuration prompt as follows:
(config-cellular 1/1)#custom-profile ha-shared-secret ascii SHAREDSECRET
5. Specify the custom profile home address using the custom-profile home-address <ip address>
command. Enter the IP address in dotted decimal notation (XX.XX.XX.XX). Using the no form of this
command removes the home address. Enter the command from the cellular interface configuration
prompt as follows:
(config-cellular 1/1)#custom-profile home-address XX.XX.XX.XX
To use the default profile settings (those that are already present on the 3G CDMA NIM), you can do one
of two things. Either do not configure a custom profile, or enter the no custom-profile command from the
cellular interface configuration prompt as follows:
(config-cellular 1/1)#no custom-profile
If only some of the custom profile settings are configured, the blank settings will use the default profile's
settings. Default settings can be viewed using the show interface cellular <slot/port> profile command
(detailed on page 48). If custom settings are configured, they will override the values initially displayed in
the show interface cellular <slot/port> profile command.
61700801G1-29.1H
Configuring the 3G CDMA NIM Using the CLI
Copyright © 2010 ADTRAN, Inc. 31