Sony DSC-W810 Help Manual page 173

Help Guide
How to use
Digital Still Camera
DSC-W810
Disconnecting the camera from the computer
Disconnects the camera from the computer.
Perform procedures from step 1 to 2 below before performing the following operations:
Disconnecting the cable.
Removing a memory card.
Turning off the camera.
1. Click on the task tray, then click
For Windows Vista, click
2. Click the confirmation message displayed on the screen.
Note
Drag and drop the icon of the memory card or the drive icon to the "Trash" icon beforehand when you use a Mac
computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7, Windows 8 computer. In this case, you can
disconnect the camera from the computer without following the above steps.
(disconnect icon).
on the task tray.
Notes on use
4-488-040-11(1)
Copyright 2013 Sony Corporation
165