Canon PIXMA MP610 Series Quick Start Manual page 115

Macintosh® Software Installation
~Note
• Since Mac®
as
9, Mac
as x
Classic environments, or Mac
as x
v.1 0.2.7 or earlier
are not supported, do not connect the machine to these.
• The screens below refer to Mac
as x
v.1 OA.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the driver, disable all anti-virus programs and automatically loading
programs.
o
Connect one end of the USB cable to the computer, the other
to the machine.
~Note
Make sure the machine is turned on.
o
Turn on your Mac and insert the Setup CD-ROM.
~Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
€)
Double-click the Setup icon.
o
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
0,
then follow the on-screen instructions.
€)
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
_
...
__
....
_
...
_""
...
~Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
() When the list of applications to install appears, confirm the
contents, then click Install.
~Note
Move the cursor over items to display explanations of each application.
o
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Setup Complete screen appears, click Next.
o
When the User Registration screen appears, click Next.
~Note
To register later, click Cancel and go to Step
tID.
After software installation is complete,
double-click on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
0
on the front page.
®
When the Installation completed successfully screen
appears, click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
~Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
~Note
• When using Mac OS X v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel on
the machine to save originals scanned from the Platen Glass to the computer, it is
necessary to select MP Navigator EX as the launch application on Image Capture
under Applications. For details, refer to "Scanning Images" in the User's Guide on-
screen manual.
Software installation is now complete.
. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
052007AN PRINTED IN THAILAND
Macintosh® Software Installation
~Note
• Since Mac®
as
9, Mac
as x
Classic environments, or Mac
as x
v.1 0.2.7 or earlier
are not supported, do not connect the machine to these.
• The screens below refer to Mac
as x
v.1 OA.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the driver, disable all anti-virus programs and automatically loading
programs.
o
Connect one end of the USB cable to the computer, the other
to the machine.
~Note
Make sure the machine is turned on.
o
Turn on your Mac and insert the Setup CD-ROM.
~Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
€)
Double-click the Setup icon.
o
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
0,
then follow the on-screen instructions.
€)
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
_
...
__
....
_
...
_""
...
~Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
() When the list of applications to install appears, confirm the
contents, then click Install.
~Note
Move the cursor over items to display explanations of each application.
o
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Setup Complete screen appears, click Next.
o
When the User Registration screen appears, click Next.
~Note
To register later, click Cancel and go to Step
tID.
After software installation is complete,
double-click on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
0
on the front page.
®
When the Installation completed successfully screen
appears, click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
~Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
~Note
• When using Mac OS X v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel on
the machine to save originals scanned from the Platen Glass to the computer, it is
necessary to select MP Navigator EX as the launch application on Image Capture
under Applications. For details, refer to "Scanning Images" in the User's Guide on-
screen manual.
Software installation is now complete.
. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
052007AN PRINTED IN THAILAND