Step 3: Connecting The Audio Cords/Hdmi Cord - Sony RDR-GX380 Operating Instructions Manual

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, A or B, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
[Speakers]
Rear (L)
Front (L)
Center
Coaxial digital cord
(not supplied)
PCM/DTS/
MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
COMPONENT
Y
PCM/DTS/
MPEG/
DOLBY DIGITAL
~
AC IN
COAXIAL
DIGITAL OUT
VIDEO L - AUDIO
LINE OUT
: Signal flow
A Digital audio input jack
If your audio component has a Dolby
*2
DTS , or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
Audio component with
a decoder
or
to coaxial/HDMI digital input
to DIGITAL OUT
(COAXIAL)
LINE 1 IN
VIDEO OUT
VIDEO L - AUDIO - R
P P
B R
IN
OUT
VHF/UHF
L - AUDIO - R VIDEO L - AUDIO - R
AUDIO OUT LINE OUT
to LINE OUT (AUDIO L/R)
- R
(red)
Audio cord
(white)
(supplied)
*1
Digital,
[Speakers]
Rear (R)
Front (R)
Subwoofer
HDMI cord (not
supplied)
to HDMI OUT
HDMI OUT
HDMI OUT
DVD recorder
(white)
(red)
TV, projector, or
audio component
B Audio L/R (left/right) input jacks
This connection will use your TV's or audio
component's two speakers for sound.
z Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
A
B
,continued 17