Additional Information; Troubleshooting - Sony SMP-N100 Operating Instructions Manual

Additional
Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power does not turn on.
, Check that the AC adapter and AC power
cord are connected securely.
Picture
There is no picture or the picture is not
output correctly.
, Check that all the connecting cables are
securely connected (page 10).
, Switch the input selector on your TV to
display the signal from the player.
, Connect the player to your TV using the
LINE OUT (VIDEO) jack, and check the
"Output Video Format" settings in the
"Screen Settings" setup (page 18).
, For HDMI connections, try the following:
Turn the player off and on again.
1
the connected equipment off and on again.
Disconnect and then reconnect the HDMI
3
cable.
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
, For HDMI connections, check the "Output
Video Format" settings in the "Screen
Settings" setup (page 18).
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
, When "Control for HDMI" is set to "On"
(page 21), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
Turn
2
US
23
,continued