Audio Settings - Sony SMP-N100 Operating Instructions Manual

z
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
"Component Video."
• If no picture appears when setting "HDMI" or
"Component Video" resolution, try another
resolution setting.
YCbCr/RGB (HDMI)
Auto
Automatically detects the
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB Outputs RGB video signals.
HDMI Deep Color Output
Auto Normally select this.
12bit Outputs 12bit/10bit video
signals when the connected
10bit
TV is compatible with Deep
Color.
Off
Select this when the picture
is unstable or colors appear
unnatural.
Pause Mode
Auto
Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.

Audio Settings

Audio (HDMI)
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM
Outputs PCM signals from
the HDMI OUT jack.
Dolby Digital
Downmix Converts to output Linear
PCM
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS
Downmix Converts to output Linear
PCM
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.
Audio DRC
Auto Performs playback at the
dynamic range specified by
the current file.
Standard
Performs playback at a
standard compression level.
Wide Range No compression works. A
more dynamic sound is
produced.
US
19
,continued