System Settings; Network Settings - Sony SMP-N100 Operating Instructions Manual

System Settings

OSD
Selects your language for the player on-
screen displays.
Control for HDMI
On Allows you to use the
"Control for HDMI"
function (page 27).
Off Turns off the function.
Auto Display
On
Automatically displays
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off
Displays information only
when you press DISPLAY.
Screen Saver
On
Turns on the screen saver
function. The screen saver
image appears when you do
not use the player for more
than 10 minutes while an on-
screen display is displayed.
Off
Turns off the function.
Software Update Notification
On Sets the player to inform you
of newer software version
information (page 18).
Off Turns off the function.
DivX(R) VOD
For details, visit the following website:
vod.divx.com
System Information
Displays the player's software version
information and the MAC address.

Network Settings

Internet Settings
Connect the player to the network
beforehand. For details, see "Connecting to
the Network" (page 13).
View Network
Displays the current
Status
network status.
Wired Setup Select this when you
connect to a broadband
router directly.
Wireless Select this when you use a
Setup wireless LAN router.
For further details, visit the
following website and check
the FAQ contents:
http://esupport.sony.com/
Network Connection Diagnostics
You can run the network diagnostic to check
if the network connection has been made
properly.
Connection Server Settings
Sets whether or not to display the connected
server.
BD Remote Device Registration
Registers your "BD Remote" device.
Some mobile devices can install the "BD
Remote" application.
For the latest compatible devices, visit the
following website:
http://esupport.sony.com/
Registered BD Remote Devices
Displays a list of your registered "BD
Remote" devices.
US
21