Sony HBD-TZ210 Service Manual page 60

HBD-TZ210/TZ230/TZ510/TZ630/TZ710
Pin No. Pin Name
57 DAMP INIT
58 SOFT_MUTE
59 DAMP_LATCH1
60 DAMP_LATCH2
61 DAMP_LATCH3
62 VCC
63 LINK_SW
64 VSS
JACK1/JACK2/
65
DAP_DET
66 DC_DET
67 SD/PVDD_DET
A.CAL_OUT/
68
DSP_INTR
69 NO USE
70 NO USE
71 HP MUTE
72 HDMI_PCONT
73 KEY_INT
74 RDS-DATA
75 RDS_CLK
76 ST_CE
77 ST_DI/MIC_DATA
78 ST_DO
79 ST_CLK/MIC_CLK
80 TUNED
81 V_SEL0
82 NO USE
83 NO USE
84 ASEL0
85 ASEL1
86 ASEL2
87 NO USE
88 NO USE
89 EUP_IN
90 NO USE
A.CAL MIC LEVEL/
91
DSP_MASTER
92 DESTINATION
93 MODEL
94 KEY2
95 KEY1
96 VSS
97 KEY0
98 Vref
99 VCC
100 SERIES
60
I/O
O D-AMP processor reset signal output
O D-AMP processor soft muting signal output
O D-AMP processor latch-1 (Front L/R) signal output
O D-AMP processor latch-2 (Surround L/R) signal output
O D-AMP processor latch-3 (Center/Subwoofer) signal output
— Power supply (BUP+3.3V)
O D-AMP data select signal output
— Ground
I Not used. (Connected to ground)
I Speaker DC balance protect signal input
I D-AMP driver shut down signal and PVDD detect signal input
I Not used. (Connected to ground)
O Not used. (Open)
O Not used. (Open)
O Not used. (Open)
O Not used. (Open)
I Wakeup signal input from function key
I RDS data input (Not used in this set)
I RDS clock input (Not used in this set)
O TUNER chip enable signal output
O TUNER serial data output
I TUNER serial data input
O TUNER serial clock output
I TUNER TUNED signal input
O Video select signal output
O Not used. (Open)
O Not used. (Open)
O Audio select signal output
O Not used. (Open)
O Not used. (Open)
O Not used. (Open)
O Not used. (Open)
O Not used.
O Not used. (Open)
I Not used. (Connected to ground)
I Destination select input
I Model select input
I Key 2 input
I Key 1 input
— Ground
I Key 0 input
— Reference voltage (3.3V)
— Power supply (+3.3V)
I Series select input (Connected to ground)
Description