Table of Contents
Advertisement
Adjustment
5
White balance
adjustment
6
Checking and modifying
the settings
(If E
2
PROM is replaced)
Adjusting conditions
1. Receive the monoscope pattern
signal.
2. Adjust the "RCUTOFF" and
"BCUTOFF" settings on the page 2
of the adjustment process mode to
become the proper white balance.
Do not change the "GCUTOFF"
settings. (It also change the black
level.)
1. Go to the adjustment mode and
check the following settings.
» V176
» V112
» V64
» V21
» V7
13
Adjusting method
1. See if all the settings are as specified.
If not, select an item in question with
138
[VOL +] or [VOL –] key and adjust the
103
settings as shown at left.
72
* An item selected will be highlighted
49
in yellow.
29
LC-13B2UA
Advertisement
Table of Contents
