Front Panel Assy - Sony FST-GTK11iP Service Manual

FST-GTK11iP/GTK33iP/RDH-GTK11iP/GTK33iP

2-20. FRONT PANEL ASSY

• JIG
When disassembling the set, use the following jig (for speaker
removal).
Part No. Description
J-2501-238-A JIG FOR SPEAKER REMOVAL
total twenty bosses
3
2 Insert the jig into a space and raise
the front panel assy.
Note 1: When using a jig, please work
so as not to injure front panel
assy and SPK box assy.
6 terminal (red)
6 terminal (black/red)
4 Remove the front panel assy
in the direction of an arrow.
ire ettin
OK
NG
28
3 All bosses are removed while moving jig in the direction
of the arrow, and front panel assy is removed.
– Bottom front view –
7 front panel assy
5 connector
(CN551)
2 Insert the jig into a space and raise
the front panel assy.
Note 1: When using a jig, please work
so as not to injure front panel
assy and SPK box assy.
1 Insert the flat-blade driver into a side space
and raise the front panel assy.
Note 2: When you install the connector, please
install themcorrectly.
There is a possibility that this machine
damages when not correctly installing it.
OK
Insert is straight
to the interior.
connector
connector
NG
Insert is shallow
connector
connector
6 terminal (black/red)
6 terminal (red)
ire ettin
OK
NG
NG
Insert is incline
connector
connector