Back Panel Block (Gtk11Ip) - Sony FST-GTK11iP Service Manual

FST-GTK11iP/GTK33iP/RDH-GTK11iP/GTK33iP
2-5.

BACK PANEL BLOCK (GTK11iP)

3 Insert tweezers etc. in the slot on four screw
covers (back panel) and remove so that it may hollow.
Note 1: Do not damage screw cover (back panel).
8 four screws
(BVTP3
7 four screw caps
8 two screws
(BVTP3 10)
9 tapping screw
(3.5 20)
5 screw cover
(back panel)
0 back panel
block
4 four claws
5 screw cover
(back panel)
– Top rear view –
Note 3: Please spread a sheet under a unit
not to injure front grille.
16
tweezers etc.
tweezers etc.
9 tapping screw
10)
(3.5 20)
5 screw cover (back panel)
4 four claws
8 four screws
7 four screw
caps
4 four claws
6 Insert tweezers etc. in the slot on eight screw
caps and remove so that it may hollow.
Note 2: Do not damage screw cap.
(BVTP3 10)
9 two tapping screws
(3.5 20)
5 screw cover (back panel)
4 four claws
1 Remove the power cord.
Power cord setting
2 cord bushing (2104)
290 ± 5 mm
cord bushing (2104)
power cord
ferrite core