Sharp XG-C50X Service Manual page 18

XG-C50X
Replacing the prism unit
1. Remove the four lock screws, and take the prism holder unit out of the optical unit.
2. Replace the prism unit with new one. Take the above step 1 in reverse order.
Note: Even if just one of the LCD panels is defective, it is necessary to replace the entire prism unit. Do not replace
just the defective LCD panel only. Under the present circumstances, please do not touch the display part of
LCD.
Optical unit
G-LCD panel
R-LCD panel
Prism unit lock screws
18
B-LCD panel