Sharp XV-Z12000 II Service Manual page 19

6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
16. Remove the three screws and detach the lamp unit.
17. Remove the two screws and detach the CW fan.
18. Remove the three screws and detach the outlet fan.
19-1. Remove the two screws and detach the bimetal.
19-2. Remove the two screws and detach wind way duct.
20-1. Remove the four screws and detach the shield plate(B).
20-2. Remove the three screws and detach the formater PWB.
20-3. Remove the three screws and detach the shield plate(A).
Shield Plate(B)
19-2
Wind way Duct
19-1
Bimetal
18
Formater PWB
20-2
20-1
Outlet Fan
Lamp unit
19
20-3
20-2
XV-Z12000 2 2 2 2 2
Shield Plate(A)
17
16