Stability - Gastrofrit TW 300 Operating Manual

Operating Manual Pasta Cooker
5. The standard height of the device is 850 mm.
The height can be increased to 900 mm by using a
support, if required.
Procedure:
1. Remove nuts (6 pcs.) on bottom inside
2. Insert support, tighten nuts
6. After installation of the device the mains plug must be accessible

3.1 Stability

Due to its insufficient stability the TW 300 pasta cooker must not be installed without the mounting
brackets supplied with the device.
Mounting options:
1. To an additional pasta cooker
2. To a kitchen furniture
3. Wall-mounting
4. Floor-Mounting
For mounting to steel sheet normal sheet steel screws can be used. For wall or floor mounting we
recommend the use of screws and dowels.