Operating Manual Pasta Cooker Table of contents 1. 1. Models and options 6.1.6 Basket selection for basket lifting mechanism 1.1 Model option pasta cooker stand-alone devices (TW 400 only 1.2 Model options pasta cooker insert devices 6.1.7 Water filling 2. Technical specifications 6.1.8 Water filling change time/amount 2.1 Electric connection 6.1.9 Washing off...
1.1 Model options pasta cooker stand-alone devices Single reservoir: TW 300 TW 400 1.2 Model options pasta cooker insert devices Single reservoir: TW 300 TW 400 Note: Dimension drawings, installation plans and electric circuit diagrams are available at Gastrofrit AG, upon request.
Operating Manual Pasta Cooker 3. Device installation When installing the device the following must be ensured: 1. The distance of the pasta cooker back panel to the next wall should be at least 100 mm. 2. The pasta cooker stand-alone device should not be positioned on an inflammable support and/or installed in a burning unit.
2. Insert support, tighten nuts 6. After installation of the device the mains plug must be accessible 3.1 Stability Due to its insufficient stability the TW 300 pasta cooker must not be installed without the mounting brackets supplied with the device. Mounting options: 1.
Operating Manual Pasta Cooker 4. Hazard warnings The pasta cooker must not be operated without water. Do not move pasta cooker in heated condition! Do not remove receiver tank when changing the water until water has cooled down to room temperature (max 60°C).
Operating Manual Pasta Cooker 5. Cleaning, water change - Switch off device by pressing On/Off button - open drain valve and drain water to receiver tank (water temperature max 60°C ) or drain to sewer line, if available - discharge waste water to sink - place empty receiver tank in the device Clean tank by boiling water with deliming agent in device.
Page 9
Operating Manual Pasta Cooker 5.1 Abglühen der Heizstäbe The pasta cooker is equipped with a heating element which is cleaned automatically by thermal heating. When the heater element is lifted it switches off. You may bypass the switching off process by repeatedly pressing the grey On/Off button.
Operating Manual Pasta Cooker 6. Operation Intended use of device: cooking of food (exclusively). Operability: - ensure that the available voltage corresponds with the performance plate of the device and the fusing is enough! - open lid of device on top and attach to back of device - remove basket - close drain valve: horizontal position = closed (vertical position = opened) - Fill tank with water...
Page 11
Operating Manual Pasta Cooker Cooking - press On/Off button - set thermostat to required temperature - if display is flashing wait until water is heated to selected temperature - place food in basket or serving cup - place basket in boiling tank - once the desired cooking time is completed raise basket and hang on hanger for draining Attention:...
Operating Manual Pasta Cooker 6.1 Operation element (basic equipment) The pasta cooker is operated via the membrane keyboard on the face side. Do not operate keys with sharp objects and do not use aggressive cleaning agents. Function of the individual keys: Timer / automatic basket raise facility option Water filling...
Operating Manual Pasta Cooker 6.1.1 Device On/Off - press On/Off button -> required temperature is displayed TEMP ˚C -> required temperature flashes if LINKS temperature has not been reached 6.1.2 Current water temperature AKTUELL ˚C - press temperature control button +/- at the same time RECHTS 6.1.3 Standby feature ->...
Operating Manual Pasta Cooker 6.1.7 Water filling - press water filling button BEFÜLLUNG -> filling runs for pre-selected time -> default setting/3 min. (press again to stop water filling) 6.1.8 Water filling - change time/volume - press water filling button for 10 seconds ->...
Operating Manual Pasta Cooker 7. Options The pasta cooker can be complemented by an option simplifying the cooking procedure and making work easier. 7.1 Operation element with automatic basket lifting mechanism Operation automatic basket lifting mechanism Switch on pasta cooker: - fill device with water - press On/Off button once - lift motor will raise...
Operating Manual Pasta Cooker 8. Customer service, maintenance In case of operation failures contact GASTROFRIT AG in Rorschach (0800 823 825 free hotline for Switzerland). Leave all repairing and connection works to qualified staff. Note (for repairing service with Gastrofrit training only): Open door before folding cover to the front! Attention! Isolate all circuits before accessing terminals.
Operating Manual Pasta Cooker 8.1 Potential troubles To avoid fault indications, before calling for a technician, check if - fuse of electric connection leads are intact - plug is connected - the main switch on the device or external is switched on - the device was started correctly...
Need help?
Do you have a question about the TW 300 and is the answer not in the manual?
Questions and answers