Page 2
Then plug the adaptor into your power strip or outlet. • Gain, High, Mid and Low tone controls for each channel 2. The EX-26 mixer is supplied with 3 sets of output jacks. • Balanced and Unbalanced Master Outputs The BALANCED MASTER OUTPUT (2) jacks are used to •...
10. DISPLAY: The red LED in the center of the display tells you that the power in your EX-26 Mixer is on. NOTE: Keep track of where you position the input The multi-colored LED DISPLAY (31) on either side of the assign switches.
Page 9
066-589 1/8 W CARBON FILM RESISTOR S 5.6KΩ 080-106 LED (RED) 3.15φ 066-591 1/8 W CARBON FILM 080-103 LED (YELLOW) 3.15φ RESISTOR S 6.8KΩ 080-107 LED (GREEN) 3.15φ 066-593 1/8 W CARBON FILM 080-111 LED (GREEN/RED) 3φ RESISTOR S 8.2KΩ 066-594 1/8 W CARBON FILM 092-141G...
Page 10
127 050-134 ELECTROLYTIC 106 054-006 POLYESTER CAPACI- CAPACITOR MINI TOR 0.0027µ/50V 6φ×8 47µ/25V 107 054-010 POLYESTER CAPACI- 128 050-185 ELECTROLYTIC TOR 0.0056µ/50V CAPACITOR MINI 108 054-011 POLYESTER CAPACI- 8φ×9 220µ/25V TOR 0.0068µ/50V 109 054-012 POLYESTER CAPACI- 130 060-702 JUMP WIRE “ ”...
Page 11
147 091-267 3P CONNECTOR WITH WIRE XHP-03 STRIP×6 150mm 148 091-480 3P CONNECTOR WITH WIRE XHP-03 STRIP×6 120mm 149 091-478 3P CONNECTOR WITH WIRE XHP-03 SCN-03 130mm 150 091-481 4P CONNECTOR WITH WIRE XHP-04 STRIP×6 150mm 151 091-609 4P CONNECTOR WITH WIRE XHP-04 STRIP×6 110mm 152 091-265...
Need help?
Do you have a question about the EX-26 and is the answer not in the manual?
Questions and answers