HA-RF100S(J)
Speakers
Use of circuit diagram
Note:
1.
The thick line (
2.
This circuit diagram is the reference diagram. Circuit and constans are subject to change without notice for improvement.
3.
Values printed in red show the voltares of each section measured by the tester (internal resistance 20 kOhms/V)
with the power switch ON.
Parts marked with A (in the shaded area
4.
designated parts to ensure safety.
18
) is the B (+) power supply.
+
+
) are safety parts. When replacing these, be sure to use only the
+
+