Samsung NC241 User Manual page 71

3
Connecting and Using a Source Device
3.2.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
1
Press [
2
To hide the information message, press [
If the optimum resolution is not selected, the message will appear up to three times for a specified

time even when the product is turned off and on again.
If the product is used as standard monitor, the optimum resolution can be configured from Control

Panel on a PC.
To configure the resolution when using the product as a network monitor, refer to "2.4 "PCoIP"".

The optimal resolution for this monitor is as follows:
Follow the above settings to set the resolution.
] to move to the language you want and press [
1920 x 1080 60Hz
English
AUTO
MENU
].
3 Connecting and Using a Source Device
].
71