Samsung NC241 User Manual page 37

2
Using "PCoIP"
IPv6 Tab
The IPv6 page lets you enable IPv6 for PCoIP devices connected to your IPv6 network.
When you make a change to one of the settings on this page, you must reboot your device for the
change to take effect.
Figure 2-4: IPv6
Enable IPv6

Enable this field to enable IPv6 for your PCoIP devices.
Link Local Address

This field is automatically populated.
Gateway

Enter the gateway address.
Enable DHCPv6

Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
Primary DNS

The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated
by the DHCPv6 server.
Secondary DNS

The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
Domain Name

The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.
Configuration
37
2 Using "PCoIP"