Continuous Rrecord; Continuous Record From The Current Pickup Position; Continuous Record Playback From Any Address; Inner Switch Position Measurement - Sharp MD-MT831H(GL) Service Manual

Continuous Rrecord

• Continuous record from the current pickup position

T R E C
PLAY
A P # # # #

• Continuous record playback from any address

T R E C
PLAY
A d 0 0 3 2
PLAY
A P # # # #
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set.
* In the start address set state the start address changes as follows when the [DISP] button is pressed.
0 0 3 2 (initial value)
H
A d 0 0 3 2
* In the start address setting state the start address change digit changes when the [MODE] button is pressed.
1st digit (initial value)
A d 0 0 3 2
* In the start address set state the value of selection digit changes in the range of 0h to Fh when
the [SKIP UP/DOWN] button is pressed.
* In the continuous record state and start address set state the record laser power changes in the
range of "0h to Fh" when the [VOL UP/DOWN] button is pressed.

Inner Switch Position Measurement

I N N E R
PLAY
S Q # # # #
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set.
: Continuous record menu
: Continuous record
: Continuous record menu
: Start address setting
: Continuous record
0 3 C 0
H
DISP
A d 0 3 c 0
9 5 0 H
2nd digit
MODE
A d 0 0 3 2
: INNER switch position measurement menu
: Continuous playback (pit section)
# # # #: Address
# # # #: Address
0 7 0 0
H
DISP
A d 0 7 0 0
DISP
3rd digit
MODE
A d 0 0 3 2
MODE
# # # # : Address
– 23 –
MD-MT831H/W
0 8 A 0
H
DISP
A d 0 8 A 0