BenQ Joybook 3000 Quick Start Manual page 21

2.
In the Source Pane, select the files you wish to burn to CD
and drag them to the Destination Pane. Then right-click on the
right side of the CD icon in the CD Layout area and select Data
CD Properties from the pop-up menu that appears.
In general, regardless of the burning format, two major steps are to be followed: Step 1 is to create the desired settings for the CD content. Step 2 is to burn the new CD.
Three steps are required only for burning Mixed-Mode CD and CD Extra CD, as they have both data and audio tracks on the same disc, which are two different types.
3.
Click the Step 2 button and make the desired settings and start burning
your CD.
Burning CDs 21