Table of Contents
Advertisement
m
Thread the machine with the thread for the
o
outline from step
placement line for the appliqué position
(APPLIQUE POSITION).
a
Pattern placement line
n
Lightly apply glue or spray adhesive, and
paste the appliqué piece so that it aligns with
the placement line.
Note
• Before pasting the appliqué piece down, make sure
the appliqué piece is positioned correctly within the
placement line.
o
With the machine threaded using the thread
for the outline from step
(APPLIQUE).
a
Outline of appliqué piece
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot, needle,
and needle plate at this time. Finish embroidering
the appliqué pattern, and then clean off the glue.
p
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
, and then sew the
m
, sew the outline
q
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
r
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
s
Dry the appliqué piece, and then iron it if
necessary.
Note
• Do not apply a strong force when ironing, otherwise
the stitching may be damaged.
■ Using a Frame Pattern for the Outline
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
a
Perform the operations described in steps
e
through
of "Creating an Appliqué Piece".
b
Select the desired frame shape and pattern,
and add it to the appliqué pattern.
a
15
Advertisement
Table of Contents
