Using The Showview Feature - Samsung DVD-VR325 Instruction Manual

Using the ShowView
Feature
Before presetting your DVD Recorder & VCR:
• Switch on both the television and your DVD Recorder
& VCR.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1
With the unit in Stop mode, press the MENU
button.
2
Press the ...† buttons to select Programme, then
press the OK or √ button.
DVD-RAM(VR)
Disc Navigation
ShowView
Standard Timer
Playlist
ShowView Extended
Disc Manager
Copy
Programme
Setup
MOVE OK
3
Press the ...† buttons to select ShowView, then
press the OK or √ button.
• A message is displayed to allow you to enter the
ShowView code.
DVD-RAM(VR)
Disc Navigation
Playlist
Enter ShowView Code number. [0-9]
Disc Manager
Copy
Programme
Setup
OK
4
Press the number buttons to enter the code of the
programme that you want to record in your
television magazine.
• If you want to correct the ShowView code that
you are entering:
• Press the œ button until the digit to be corrected
is cleared.
• Enter the correct digit.
Programme
√ √
√ √
: Off
√ √
RETURN EXIT
ShowView
RETURN EXIT
5
Press the OK button.
• The information concerning the programme is
displayed.
• When using the ShowView function for the first
time with stored stations, the programme number
flashes. This one time, you must enter the PR
number manually by pressing the ...† buttons.
DVD-RAM(VR)
No. To PR Day Start
No. 01
01 DVD AV1 Daily 11:00
02 DVD 01 Daily 09:22
To PR Day Start
03 -- --- --/ - - --:--
DVD AUX SAT01 11:00
04 -- --- --/ - - --:--
05 -- --- --/ - - Recordable Time 01:23 SP --:--
06 -- --- --/ - - --:--
MOVE OK
DVD-RAM(VR)
No. To PR Day Start
01 DVD AV1 SAT01 11:00
02 DVD 01 SAT01
03 -- --- --/ - - --:--
04 -- --- --/ - - --:--
05 -- --- --/ - - --:--
06 -- --- --/ - - --:--
MOVE OK
6
If the programme and times are correct, press the
OK button.
7
Turn the power off by pressing the STANDBY/ON
button to activate the timer recoding setting.
8
Refer to pages 63~64 if you want to:
• Check whether the timer Recording has set
correctly or not.
• Cancel a preset recording.
The numbers next to each TV programme
I
listing in the magazines or newspapers
Note
are ShowView code numbers, which allow
you to programme your DVD Recorder &
VCR instantly with the remote control.
Enter the ShowView code for the
programme you wish to record.
ShowView is a trademark of Gemstar
I
Development Corporation. The ShowView
system is manufactured under licence
from Gemstar Development Corporation.
Scheduled Record List
End Speed V/P Edit
13:00 SP Off
√ √
10:30 SP Off
√ √
End Speed V/P
--:-- -- --
√ √
13:00 SP Off
--:-- -- --
√ √
--:-- -- --
√ √
--:-- -- --
√ √
RETURN EXIT
Scheduled Record List
End Speed V/P Edit
13:00 SP Off
√ √
09:22 10:30 SP Off
√ √
--:-- -- --
√ √
--:-- -- --
√ √
--:-- -- --
√ √
--:-- -- --
√ √
RETURN EXIT
English - 65