Divx(R) Registration; Setting Up The Parental Control - Samsung DVD-VR325 Instruction Manual

❚
Output selection
• Connect the DVD Recorder & VCR to your TV via
HDMI or DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in Stop
mode to select the HDMI output resolution as
follows: 576i ¡ 576p ¡ 720p ¡ 1080i
• HDMI/DVI does not support 576i. Video with 576i
resolution can only be viewed through the analog
outputs (Composite/S-Video/Component)
Progressive scan automatically activates when
HDMI is connected. (Please make sure PSO is
Note
indicated on the front panel of the DVD
Recorder & VCR.)
There will be no HDMI video and audio outputs
unless progressive scan function is activated.
Consult your TV User's Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User's Manual regarding Progressive Scan
settings in the TV's menu system.
If Video Output is set incorrectly, the screen
may be blocked.
The resolutions available for HDMI/DVI output
depend on the connected TV or projector.
For details, see the user's manual of your TV
or projector.
When the resolution is changed it may take a
few seconds for a normal image to appear.
If you set the HDMI output resolution 720p or
1080i, HDMI output provides better picture
quality.
DivX playback screen output can only be done in
576p.

DivX(R) Registration

Please use the Registration code to register this DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod
Setting Up the Parental
Control
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps
you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1 With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
Press the ...† buttons to select Setup, then press
2
the OK or √ button.
No Disc
Programme
System
Clock Set
Setup
Install
Language
Audio
Video
Parental Control
MOVE OK
Press the ...† buttons to select Parental Control,
3
then press the OK or √ button.
• The 'Create the password' message will be
displayed.
No Disc
Programme
Setup
Create the password
NUMBER OK
4 Enter the 4-digit password using the 0 to 9 buttons
on the remote control.
• The 'Confirm the password' message will be
displayed.
No Disc
Programme
Setup
Confirm the password
NUMBER OK
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Parental Control
RETURN EXIT
Parental Control
RETURN EXIT
English - 33