Variable Search System - Samsung DVD-VR325 Instruction Manual

Variable Search
System
Each time you record a cassette on this DVD Recorder
& VCR, an index is automatically marked on the tape
when recording starts.The Search function allows you to
fast-forward or rewind to a specific index and start
playback from that point. Depending on the direction
selected, the indexes are numbered as follows
• This DVD Recorder & VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
❚
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette.
1 Press the CLEAR button at the point on the tape
where you want to set the counter to 0:00:00.
2 While a cassette is stopped, press the ANYKEY
button.
VCR
Go To [0:00:00]
End Search
Forward Intro Scan
Reverse Intro Scan
MOVE OK
Press the ...† buttons to select Go To [0:00:00],
3
then press the OK button.
The VCR will rewind or fast forward, searching for
the 0:00:00 counter position, and then automatical-
ly stop at that position.
Go To [0:00:00]
œœ
0 : 00 : 03
❚
End Search
Use this feature when you want to search for a blank
position to record a programme on a cassette.
56 - English
1 While a cassette is stopped, press the ANYKEY
button.
VCR
Go To [0:00:00]
End Search
Forward Intro Scan
Reverse Intro Scan
MOVE OK
Press the ...† buttons to select End Search, then
2
press the OK button.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that
position. If the VCR reaches the end of the tape
during end search, the tape will be ejected.
End Search
√√
0 : 00 : 03
❚
Forward/Reverse Intro Scan
Use scan and play when you don't know exactly
where a programme is located on a cassette tape.
1 While a cassette is stopped, press the ANYKEY
button.
VCR
Go To [0:00:00]
End Search
Forward Intro Scan
Reverse Intro Scan
MOVE OK
Press the ...† buttons to select Forward Intro
2
Scan or Reverse Intro Scan, then press the OK
button. When an Index mark is found the DVD
Recorder & VCR will playback the tape for 5
seconds, after which it will continue searching for
the next Index mark.
Scan and Play
√√
0 : 00 : 23