Error Codes - Sony KDP-57XBR2 Training Manual

A single digit change in the data for each option will move the affected flag a considerable distance. These
alignments should only be adjusted if the flags display unevenly after correct centering, size and skew have been
confirmed with a calibrated source.

Error Codes

Figure 28-4 illustrates what will appear on the screen if an error occurs. This error message only appears while
in the service mode. Any errors that arise during a Flash Focus
the PJE mode under "PJE ERR". This is shown in Figure 28-5.
Note: Once an error occurs it will remain in the PJE ERR slot. It can be cleared by scrolling to the error code and
moving the remote control cursor to the left.
ERROR G
LO LEVEL S3
1
FIGURE 28-4 - FLASH FOCUS
DURING SERVICE MODE
PJE 62
Color:
0 = Green
1 = Red
2 = Blue
FIGURE 28-5 - ERROR CODE STORED IN NVM
28. Auto Registration Troubleshooting
TM
will be stored into the NVM and can be read in
0
3
TM
ERROR
213
Error Code
(See error list)
118
2