Sanyo PLC-XTC50L Service Manual page 84

Chassis Description
the projector is detecting abnormal condition.
Indicators
WARNING WARNING
POWER
TEMP . FILTER
green / red
red orange
✽
✽
Fig.2 F ilter replacement icon
Fig.3
Fig.4 F ilter cartridge replacement icon
✽
green
✽
red
✽
red
✽
✽
✽
red
✽
red
LAMP 1/2
SHUTTER
REP .
blue
yellow
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
Projector Condition
If the Filter counter reached a time set in the timer setting,
a Filter replacement icon (Fig.2) appears on the screen
and the WARNING FILTER indicator on the top panel
lights up. Replace the filter as soon as possible. If the filter
is out of scroll and the projector reaches a time set in the
timer setting, Fig. 3 appears on the screen and the WARN-
ING FILTER indicator lights up. Replace the filter cartridge
as soon as possible.
If the filter is clogged and no scroll is left in the filter car-
tridge, a Filter cartridge replacement icon (Fig.4) appears
on the screen and the WARNING FILTER indicator lights
up. Replace the filter cartridge as soon as possible.
Note:
• Fig.2, Fig.3 and Fig.4 icon will not appear when the Dis-
play function is set to "Off", or during "Freeze".
The filter cartridge is not installed in the projector. Check
the filter compartment to see if the filter cartridge is in-
stalled in the projector.
The projector detects an abnormal condition during filter
scroll.
The projection is being cooled down after detecting an
abnormal condition during filter scroll.
The projector has been cooled down enough and is in the
stand-by mode after detecting an abnormal condition dur-
ing filter scroll
The projector detects an abnormal condition and cannot
be turned on. Unplug the AC power cord and plug it again
to turn on the projector. If the projector is turned off again,
unplug the AC power cord and contact the dealer or the
service center. Do not leave the projector on. It may cause
an electric shock or a fire hazard.
The shutter is out of control.
The shutter is out of control. (The projector is in the cool-
ing mode.)
The shutter is out of control. (The projector is in the stand-
by mode.) In that case, contact the service station imme-
diately.
-84-