Sanyo PLV-Z2 Service Manual page 9

■ Cleaning
■ Cleaning the Projection Lens
Follow these steps to clean the projection lens.
Disconnect the AC power cord before cleaning.
1
2 Softly wipe the projection lens with a cleaning cloth that contains
a small amount of non-abrasive camera lens cleaner, or use lens
cleaning paper or a commercially available air blower to clean
the lens. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface.
3 When the projector is not in use, replace the lens cover.
■ Cleaning the Projection Cabinet
Follow these steps to clean the projector cabinet.
1 Disconnect the AC power cord before cleaning.
2 Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild detergent
and finish with a soft, dry cleaning cloth. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
3 When the projector is not in use, put the projector in the carrying
case to protect it from dust and scratches.
-9-