Sanyo PLV-Z2 Service Manual page 19

■ Optical Parts Disassemblies
5.
POLARIZED GLASS-OUT AND WIDE VIEW PLATE REMOVAL
A
1. Remove 4 screw and take the LCD Panel/Prism
Ass'y upward from the Optical Unit.
2. Remove each screw B and take the glass off upward.
Note:
1.
Fix the plate that the mark is located to left and
upper.
R,G: Red marking, B: Blue marking
2.
Should be replaced the glass as the film attached
side comes to the LCD panel side.
6.
OPTICAL UNIT TOP REMOVAL
1. Remove Cabinet Top, Cabinet Front, Main Board, AV
Board and Filter Ass'y.
2. Remove 8 screws to take the Optical Unit Top off
upward.
LCD Panel/Prism Ass'y
Polarized
Grass-Out
A
A
A
A
Optical Unit
Top
-19-
Note 1
B
Wide View
Plate
Film
Note 2
Fig. 5
Fig. 6