Technical Specifications; Installation; Unpacking; Fitting - Electrolux EFI 60011 User Manual

Technical Specifications

Model
Dimensions (in cm):
Height:
Width:
Depth:
Maximum absorbed power: 180 W
Motor:
Lighting:

Electrical connection:

Fuse rating:
Subject to change without notice.

Installation

Unpacking

Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the company responsible for the
transportation.
Damages, faults and eventually missing details
should immediately be reported to the retailer.
Take care of the packing materials so that small
children cannot play with them.

Fitting

The hood is to be mounted on the wall.
When installed, the hood must be no less than 50
cm. above electric burners or 70 cm. above gas or
mixed-fuel burners.
The hood can be installed above these heights but
for optimum performance it should be installed at
the distance quoted for the appropriate heat source.
Electrical connection (not for
UK)
Safety warnings for the electrician
Before connecting the appliance to the power
supply, check that the voltage indicated on the
rating plate corresponds to the mains power supply
available. Appliances fitted with a plug can be
connected to any standard power socket within
easy access.
Attention: substituting the supply cable must
be carried out by an authorised electrician.
Should it be necessary to provide a fixed
connection, the hood must only be installed by an
electrician authorised by the local electricity board.
When installing, an omnipolar disconnector with a
distance of at least 3 mm between contacts must
be provided.
Fixed connection of the appliance must only be
carried out by an authorised electrician.
EFI 60011 EFI 60012
400 400
559 599
270 270
220 W
100 W 140 W
2x40 W 2x40 W
220-240W 220-240W
5A T 5AT
EFI 60013
400
559
270
380 W
2 x 150 W
2 x 40W
220-240W
5A T
Fig. 7
Electrical connection for UK
only
Safety warnings for the electrician
Connect the hood to the mains supply via a double
pole switch which has 3 mm minimum separation
between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
- the wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black,
- the wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
- EFI 60013 Only: the wire which is coloured
green and yellow must be connected to the
terminal which is marked with the letter E or by
the earth symbol (
green and yellow;
GREEN & YELLOW
BLUE
12
Min
Min
70 cm
50 cm
), or coloured green or
EFI 60013 Only
BROWN
CORD CLAMP