Foxconn 760GXK8MC Manual page 42

Chapter 3 BIOS Description
Video Off Method
This option is used to define the video off method. "Blank Screen" mode
means that after the computer enters power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the "V/H SYNC + Blank" mode the vertical and horizontal
scanning movement of screen stops when the computer enters power
saving mode. "DPMS Supported" mode is a new screen power management
system, and it needs to be supported by the monitor you're using.
Switch Function
This option is used to enable or disable switch function to wake up. The
setting values are Break/Wake and disabled.
MODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
Hot Key Function As
This option is used to define the hot key function. The available setting values
are Disabled, Power off, Suspend.
HDD Off After
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are Disabled and 1 Min -15 Min.
Power Button Override
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When "Instant Off" is selected, press
the power switch to immediately turn off power. When "Delay 4 Sec" is
selected, press and hold the power button for four seconds to turn off power.
Power status Resume Control
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are
Always Off (remain in turn off status), Always On (restart) and Keep Pre-Status
(resume with the pre-vious status).
PM Wake Up Events
Press enter to set the items of PM Wake Up Events.
AMD K8 Cool 'n' Quiet Control (Default: Auto)
When this item is set as "Auto", AMD Cool 'n' Quiet technology controls your
system's level of processor performance automatically, dynamically adjust-
ing the operating frequency and voltage according to the task at hand.
36