Remote Access Code - AT&T CL82450 User Manual

Telephone settings
Answering system settings
• Toll saver - the answering system answers a call after two rings if
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges when calling from out of your local area.
6. Press /SELECT to confirm your setting. You hear a confirmation tone.
MENU
Press OFF/
NOTE: If you subscribe to voicemail service through your telephone service provider, see
Answering system and voicemail on page 40.

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then
press /SELECT.
MENU
3. Press qCID or pDIR to scroll to >Ans sys setup, then
press /SELECT.
MENU
4. Press qCID or pDIR to scroll to >Remote code, then
/SELECT.
press
MENU
5. Use the dial pad to enter a
/DELETE to backspace and delete a digit.
MUTE
6. Press /SELECT to confirm your setting. You hear a
MENU
confirmation tone. Press
to cancel.
CLEAR
two-digit number. Use
OFF/ to cancel.
CLEAR
19
to Play messages
SELECT
Answering sys
>
Ans sys setup
>
-End of list-
Remote code
>
Msg alert tone
REMOTE CODE
19