Every 50 Hours; Lubricating Grease Fittings; Checking Wheel Bolt Torque - Kubota Power Krawler M8540 NARROW Operator's Manual

16 PERIODIC SERVICE

EVERY 50 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 50 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(1) Grease fitting (sprocket) [RH, LH: 12 fittings for each side]
(1) Grease fitting (swing shaft) [RH, LH]
BChecking Wheel Bolt Torque
To avoid personal injury:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
(1)
260 to 304 77.5 to 90.2
(26.5 to 31.0) (7.9 to 9.2)
N-m (kgf-m)
(2) (3)
260 to 304
(26.5 to 31.0)