Advertisement
M234 ANALOG CHORUS
DESCRIPTION
POWER
• Analog bucket-
The MXR Analog Chorus is
brigade technology
powered by one 9-volt battery
(remove bottom plate to install),
• Small footprint saves
a 9-volt AC adapter such as the
pedalboard space
Dunlop ECB003/ECB003E, or a
• HIGH and LOW cut controls
DC Brick
™
for detailed tone sculpting
• Two outputs for a wide and
sweeping stereo spread
CONTROLS
LOW knob controls amount
of low frequency cut
HIGH knob controls amount
of high frequency cut
LEVEL knob controls
overall effect volume
RATE knob controls speed
of chorus effect
DEPTH knob controls overall
intensity of chorus effect
THRU OUTPUT jack engages
stereo mode
7 FOOTSWITCH toggles effect on/
bypass (blue LED indicates on)
DIRECTIONS
• Run a cable from your guitar to
the Analog Chorus' INPUT
jack and run another cable from
the Analog Chorus' Mono
OUTPUT jack to your amplifier
(for mono operation).
Optional Stereo Mode: run an
additional cable from the THRU
power supply.
OUTPUT jack to the input of
a second amp. Using this jack
automatically sends the delayed
signal only to the Mono output
jack when the effect is on and
outputs a buffered copy of the
input signal.
• Start with all controls
set to 12 o'clock.
• Turn the effect on by
depressing the footswitch.
SAMPLE SETTINGS
"MOMS" PROM
80'S ANGULAR HAIRCUT
• Rotate the DEPTH knob
clockwise to increase the
intensity of the effect or
counterclockwise to decrease it.
• Rotate the RATE knob clockwise
to increase the speed of the
chorus effect or counterclockwise
to decrease it.
• Rotate the LEVEL knob clockwise
to increase overall effect volume
or counterclockwise to decrease
it.
• Rotate the LOW knob clockwise
to retain more low end or
counterclockwise to cut
more low end.
• Rotate the HIGH knob clockwise
to retain more high end or
counterclockwise to cut
more low end
SAD SEATTLE RAIN
FACE SPACE TWEETER
90'S GRUNGY BALLAD
00'S INDIE SHOE GAZER
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance
1 kΩ
Noise Floor*
Effect On
-96 dBV
Bypass
-106 dBV
Tone Controls
LOW
70 Hz to 800 Hz
12 dB/oct shelf
HIGH
660 Hz to flat
6 dB/oct shelf
Bypass
Buffered
Current Draw
13 mA
Power Supply
9 volts DC
*Tone controls center, all others max CW,
A-weighted
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
DUNLOP MANUFACTURING, INC.
Advertisement
