Operation; Hair Structure And Temperature Settings; Lcd Display; Stop Mode - Beko BKK 1178 SM User Manual

3

Operation

3.1 Hair structure and
temperature settings
The appliance allows you to make indi-
vidual temperature settings. Depending
on the hair structure, we recommend
the following settings:
• For fine, porous, colored, bleached
hair: 150 °C
• For normal hair: 160 °C to 170 °C
• For strong, resistant, thick hair:
180 °C

3.2 LCD display

3.2.1 Stop mode

The appliance will run in stop mode
when it is plugged in or turned off. The
LCD will show "000" without backlight
in this mode.
Stop mode
• Default set temperature: 160 °C
C
The appliance will re-
member the last setting
if it is turned off and still
plugged in the socket.
LCD will display (5) the segment bar
to indicate the heating up or cooling
down.
Hair Curler / User Manual
• From one segment to four segments
when the appliance is heating up.
• From four segments to one segment
when the appliance is cooling down.
• The blue backlight will flash until the
preset temperature is reached.
• The appliance will run in "Lock
mode" if no button is pressed for 5
seconds.

3.3 Turbo heating

By pressing and holding the heat set-
ting button "+" (6) for 2 seconds, the
appliance will immediately heat up
to the highest temperature setting
(180°C).

3.4 Temperature setting

The temperature can be set using the
heat setting buttons "+" (6) or "-" (7)
with 4 levels ranging from 150 °C to
180°C.
1. Switch the appliance on by pressing
the On/Off button (9) for 2 seconds.
The LCD lights up in blue.
2. Press the heat setting buttons "+"
(6) or "-" (7) to set the temperature.
Heat setting button "-" (7) reduces
the temperature in 10°C incre-
ments, "+" (6) increases the tem-
perature in 10°C increments.
11 / 26 EN