JVC KW-AVX800 Instructions Manual page 57

Menu items
Divx Regist. (Registration)*
D. (Dynamic) Range Compres.
7
(Compression)*
7
Speaker Size*
8
Speaker Level*
* 7
Selectable only for "DISC," "SD," and "USB." (Playback stops when you change the setting.)
* 8
Selectable only for "DISC," "SD," and "USB."
* 9
This subwoofer level setting takes effect only when surround is activated. ( also page 24)
Selectable settings, [reference page]
7
This unit has its own Registration Code. Once you have played back a
file with which the Registration Code recorded, this unit's Registration
Code is overwritten for copyright protection.
You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
You can adjust the speaker size setting.
As you change the speaker size, the speaker on the screen changes its
size. When <None> or <Off> is selected, the speaker is shaded.
• L/R (Front): Small, Large
• C (Center): None, Small, Large
• LS/RS (Surround): None, Small, Large
• SW (Subwoofer): On, Off
• Speaker size: <Large> for 13-cm (5-1/8 inches) diameter or more;
<Small> for 13 cm (5-1/8 inches) or less.
• If you select <Large> or <Small> for non-connected speakers, the
incoming signals for the non-connected speakers will not come out
of any other speakers.
• Front speakers and surround speakers cannot be adjusted separately
for left and right speakers.
Regardless of the setting above...
• No sound comes out of the subwoofer while playing Dolby Pro Logic
II Movie or Music if the front speaker is set to <Large>.
• No sound comes out of the center speaker when surround is
deactivated.
You can adjust the output level of the activated speakers (
<Speaker Size> above), monitoring the test tone.
9
L/C/R/RS/SW* /LS: : adjust the output level of each speaker in the
range of –10dB to +10dB; Initial 00dB.
• Press [Test] to turn on and off the test tone.
57
Continued on the next page
SETTINGS