JVC KW-AVX800 Instructions Manual page 60

Disc Surround
Menu items
Surround
Surround Mode
Panorama
18
Center Width*
* 17
Selectable only for "DISC", "SD," and "USB."
* 18
This setting takes effect only when the center speaker is activated.
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, [51]
Sound
Menu items
Fader/Balance
Volume Adjust
Subwoofer Phase
19
Subwoofer Level*
High Pass Filter
19
* This subwoofer level setting takes effect only when surround is deactivated. ( also page 24)
* 17
Selectable settings, [reference page]
On, Off, [24]
Auto, Through, Dolby PLII Movie, Dolby PLII Music, [24]
On, Off, [24]
00 to 07; Initial 04, [25]
Selectable settings, [reference page]
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only (F6)
• Downmost—rear only (R6)
When using a two-speaker system, set the fader to the center (0).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only (L6)
• Rightmost—right only (R6)
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
• For Disc/SD/USB: An auto-adjustment level is commonly used when playing
DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files
Select either <Normal> or <Reverse>, which reproduces a better sound.
Adjust the subwoofer output level. Level: –06 to +08; Initial 00
Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
60