Linking To A Bluetooth Adapter In Serial Port Profile Mode; Linking To A Bluetooth Adapter In Hid Mode - Datalogic QuickScan QBT21X1 Quick Reference Manual

then scan the
base.
Linking to a Bluetooth Adapter in
Serial Port Profile Mode
1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
make the scanner visible to the host computer.
3. Use the host computer's Bluetooth manager to
"Discover new devices" and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4. Use an RS-232 terminal program to see incom-
ing data on the port designated by the com-
puter's Bluetooth manager.

Linking to a Bluetooth Adapter in HID mode

1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
3. Use the host computer's Bluetooth manager to
"Discover new devices" and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
Quick Reference Guide
Unlink bar code before re-linking to the new
Enable RF Link to Server
Enable RF Link to Server
Link to PC in HID
Unlink
label below..
Linking the Reader
label below to
11