Connecting The Base Station; Base Station Connection And Routing - Datalogic QuickScan QBT21X1 Quick Reference Manual

Connecting the Base Station

Connecting the Base Station
Figure 3 on page 5
a terminal, PC or other host device. Turn off the host before
connection and consult the manual for that equipment (if
necessary) before proceeding. Connect the interface cable
before applying power to the Base Station.
The QBT21X1 can also be Powered by the Termi-
nal. When powered by the Terminal, the battery
charger is automatically set as Slow charge.
For some specific interfaces, hosts, or lengths of
NOTE
cable, the use of an external power supply may be
recommended for full recharging capability (see
"Technical Specifications" on page 30
details).

Base Station Connection and Routing

1. Remove the rubber Cable Stopper from the bottom of
the Base Station.
2. Securely plug the Power Cable (if used) and Interface
(I/F) Cable connectors into their respective ports in the
underside of the Base Station.
Cable Stopper
4
shows how to connect the Base Station to
Power Cable
I/F Cable
QuickScan™ QBT21X1
for more