System And Network Layout; Typical Setup With Cradle And Host; Power Supply - Datalogic QuickScan QBT21X1 Quick Reference Manual

Connecting the Base Station
Most connections plug directly into the host device as shown
in Figure 4. Keyboard Wedge interface cables have a 'Y' con-
nection where its female end mates with the male end of the
cable from the keyboard and the remaining end at the key-
board port on the terminal/PC.
Figure 4. Connecting to the Host
or...
Power Connection —
Plug the AC Adapter into an approved AC
socket. If plugged into the wall, ensure cable is facing down-
wards (as shown in Figure 3) to prevent undue strain on the
socket.

System and Network Layout

Typical Setup with Cradle and Host

Figure 5. Reader Layout
Reader
Host
Base Station

Power Supply

6 QuickScan™ QBT21X1