Disassembly - Pioneer DEH-1300MP Service Manual

5

7. DISASSEMBLY

While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.
-
Removing the Panel Assy (Fig.1)
1 Remove the two hooks.
Remove the two hooks
2
and then remove the Panel Assy.
-
Removing the CD Mechanism Module (Fig.2, 3, 4)
Remove the screw.
1
Remove the two screws.
2
The CD Mechanism Module side is made a bottom.
Push the area and remove the two hooks.
3
Slide the Tuner Amp Assy
in the direction of the arrow
4
and then remove the hooks
of upper and lower.
Lift off the Tuner Amp Assy from the Heat sink side.
The Tuner Amp Unit is fixed into the ditch.
5
Disconnect the FFC
6
and then remove the CD Mechanism Module.
5
6
2
2
3
Tuner Amp Assy
CD Mechanism Module
DEH-1300MP/XNUC
6
7
1
1
Panel Assy
1
Heat sink side
CD Mechanism Module
6
5
7
8
A
2
Fig.1
B
2
Fig.2
C
3
Fig.3
D
E
Fig.4
F
27
8