Error Code List - Pioneer DEH-1300MP Service Manual

1

5.2 ERROR CODE LIST

Error codes
A
When the CD drive does not work or stops during operation due to an error, the CD drive enters the Error mode and
displays the causes of the error by number. This is intended to reduce nonsense calls from users and supplement the
analysis and repair performed by service members.
Basic displaying means
When the CD MODE (CD mode display area) displays ERROR (0xFD), an error code is written in MIN (minute display
area) and SEC (second display area).
Same data is written in MIN and SEC.
TNO is blank (#0FFH) as usual.
Head unit display examples
B
The following are displayed according to the display capability of the LCD. xx stands for an error code.
*For OEM products, errors are displayed as per specifications of the OEM client
8-digit display 6-digit display
ERROR-xx ERR-xx
CD error code list (Error mode 0xFD)
Code Category
10 Servo Carriage home error
C
11 Servo Focus error
12 Servo Spindle lock error
Sub-code error
RF amplifier error
15 Servo RF error
17 Servo Setup error
22 Disc Impossible to play
D
23 Disc File format error
24 Disc All DRM
30 Servo Search time-out
E 50 Mecha Ejection error
51 Mecha Ejection rotation retrial
error
52 Mecha Disc loading error
F
20
1
2
4-digit display
E-xx
Error
Cause: HOME switch failure or carriage movement failure
Details: The pickup cannot move to the inner circumference or it cannot
move from the inner circumference to the outer circumference.
Causes: Disc is inserted upside down, disc is dirty or vibrated, etc.
Details: Out of focus
Causes: Spindle error, disc is damaged, dirty, vibrated or contains no data,
RF signal error, etc.
Details: The spindle rotation speed is unstable, sub-code is unreadable, etc.
Cause: CD R/RW disc contains no data.
Details: Digital signals from disc cannot be detected.
Causes: Disc is damaged, dirty, vibrated, etc.
Details: Laser output cannot be adjusted, focus is unstable, etc.
There is no playable MP3 file or WMA file.
-> The set CD-ROM disc did not contain any MP3 file or WMA file.
The data was written in noncompliant file format.
-> A CD-ROM containing data recorded in a file format other than ISO9660
Level-1 or 2 (such as UDF) was set.
All the playable files in the disc are the DRM files.
-> This error will not occur if there is any non-DRM file.
Cause: Carriage or tracking failure, disc is damaged or dirty, etc.
Details: This error indicates that a target address could not be reached and
the search time has run out. This error occurs after the search mode
changes to the SETUP mode.
Cause: Loading or ejection failure
Details: This error occurs when loading or ejection has failed and ended in
the middle (before completion of loading or ejection).
Cause: Ejection rotation retrial failure
Details: This error occurs when automatic loading was successful after
ejection rotation retrial has failed (twice).
Cause: Disc loading cannot be completed.
-> Foreign substances were inserted. Disc was caught.
DEH-1300MP/XNUC
2
3
Details and causes
3
4
4