６-１ Panel Operating - Fuji Electric PEN102J1C User Manual

６-１ Panel operating
The setting method in the operation panel is shown. The item is displayed
in LCD. The item and the content can be changed by using the operation
button (ESC button/SET button /▲ button /▼ button).
Figure ６-1 shows the panel used when setting of ①～⑲, and explains
the operation as follows.
・The alarm generation or the mode changes for this period, and this state is
ended. The content of the setting change is not reflected.
1. Push the SET button for 3 seconds. "Configuration" is displayed in
LCD. At this time, the item of ① on the former page is displayed.
２. ▲ button/▼ button is pushed, and it moves to the item that changes.
３. Push the SET button when you move to the item that changes. The
content of the item is displayed.
４. ▲ button/▼ button is pushed, and it moves to the content that
changes.
５. It is changed to the content to which it wants to change the content
of the item that changes by pushing the SET button. And, it becomes
the next item display of the item that changes. Push the ESC button
when you want to return to the item that changes.
６. This state can be ended by always preserving the content of the
change when the ESC button is pushed for 3 seconds.
・ This state ends automatically when a no operation passes 2 minutes. The
content of the change is not reflected.
・When the event is generated on the way, this state is discontinued. At this time,
the content of the change is not reflected.
Figure ６-1 Panel
28