Chapter１ Summary; １-１ Feature - Fuji Electric PEN102J1C User Manual

Chapter１
Summary
１-１ Feature
Uninterruptive power supply (UPS) defends an electronic equipment from
the power supply trouble that the power failure, the voltage sag, the
voltage surge, the voltage decrease, the excess voltage, the utility power
noise, the frequency variation, the switching noise, the harmonics wave.
Such a power supply trouble destroys critical data, loses the content of
the work of the unpreservation, and there is a possibility of damaging
hardware. As a result, productivity of long time is lost, and high recovery
cost is generated.
UPS series is composed by UPS and External Battery module(EBM) of
each capacity / form by shown in Table １-1.
Capacity
1kVA
1.1kVA
1.5kVA
2.4kVA
3kVA
EBM is constituted for increase when the backup is long necessary.
It introduces the feature of UPS that offers the superior performance and
reliability.
・ Normal mode of clean sinusoidal output／High Effeciency(HE) mode
that suppressed power consumption／Intelligent mode that switches
automatically between Normal mode and High Effeciency(HE) mode by
judging utility input, these modes of three stages can be selected from
front panel or communication. In this case, it becomes a compulsion
change.
・ In the Normal mode of a clean sinusoidal output, the exchange input
electric power is filtered, it adjusts, and a steady electric power to the
equipment is offered.
・ The High Effeciency(HE) mode that suppresses power consumption
contributes to the power consumption reduction.
・ The intelligent mode of a possible mode switching can change both the
power consumption reduction and the power supply quality by the
1
Table １-1
Rack & Tower Type
UPS
PEN102J1RT
PEN152J1RT/15 PEB048-2RT
PEN152J1RT
PEN302J1RT/30 PEB072-2RT
PEN302J1RT
UPS series
EBM
PEB036-2RT PEN102J1C
PEB048-2RT
PEB072-2RT
Tower Type
UPS EBM
PEB036-2C
―
―
―
―
―
―
―
―