DOD S1+ Use Manual page 13

 Replay Mode
1. Press "MODE" Photo or Video mode can replay photos or videos, and then select the
photo or video with Left or Right button. When browsing the photos, press REC button to
play or stop, and press "Preview" button to pause.
2. Delete
When replaying photos or videos, press "MENU" button to select the current file mode, and
then press OK to delete the current video or photo. Select all files and press OK to confirm,
and then press OK again to delete all files.
 Set Motion Detection
When the Motion Detection Function is open, the relative displacement in photos will be
detected automatically, if the object moves out of the default displacement, the record is
started automatically. Each time, the record lasts for 15s, after that, the machine will continue
detecting.
When the power is on, press "MENU" button to select detected item, and then press Up or
Down to select ON/OFF, and then press OK to save or exit.
 Set G-SENSOR Function
After starting of gravity sensing function, in case of vehicle collision or impact during video
recording, it will lock and save current video automatically and set to avoid the previous video
and following video files of loop recording cycle from being covered by the loop recording
lock of the machine in order to guarantee safety of important video.
In the "ON" status, press MENU key to enter the option of gravity sensing strength. Press up
or down key to select sensitivity. Press OK key to save the option and exit.
12