Safety Instructions; Important Safety Instructions - ACOUSTIC SOLUTIONS CDAB-1 Instruction Manual

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove any cover.
NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO
QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

• Read and keep these instructions available for future reference.
• For indoor use only.
• The unit must only be connected to a suitable mains power supply using
the mains power lead provided.
• To reduce the risk of fire or electrical shock, do not expose this unit to rain
or moisture.
• The apparatus shall not be exposed to dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on the
apparatus.
• Unplug the unit from the wall socket during lightning storms and when it is
not going to be used for a long period of time.
• Take care that foreign objects do not enter, or liquids are not spilled, into
the enclosure through any openings. If this should happen, refer to
qualified service personnel before attempting to use.
• Ensure adequate ventilation - do not cover this unit with curtains, etc.
• Do not install near any heat source, such as radiators, or other equipment
that produces heat.
• Protect the mains power cable from being damaged.
• The CDAB-1 system is double insulated and does not require an earth
connection in the UK mains plug.
CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
The lightning flash symbol with the arrowhead within an equilateral triangle is
intended to alert the user to the presence of uninsulated 'dangerous voltage'
within the product's enclosure that may be sufficient to constitute a risk of
electric shock to persons
The exclamation point within an equilateral triangle is intended to alert the
user to important operating and maintenance instructions in the service lit-
erature relevant to this appliance.
UK MAINS PLUG DETAILS
For your convenience a mains plug with a fuse (3 Amp) has been itted to
this appliance. For your safety please observe the following information.
• The CDAB-1 is designed to operate on AC mains supply between 220
and 240 volts, 50 Hz.
• The wires in the mains lead are coloured in accordance with the
following code:
BLUE - NEUTRAL
BROWN - LIVE
• Under no circumstances should the Neutral or Live wires be connected
to the 'E' (Earth) terminal.
WEEE marking
"Information for the consumer"
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
When this crossed out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2004/108/EC.
Please make yourself aware of the local collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste. The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.
This product complies with European low voltage (2006/95/EC)
and electromagnetic compatibility (2004/108/EC) directives.
Page 3