Advertisement
TROUBLE SHOOTING
We hope you have many years of enjoyment from the CDAB-1 system,
however if you are having any difficulties please follow the trouble shooting
guide below or contact the Acoustic Solutions' helpline on 0871 2307747.
This helpline is manned from 9:00am to 1:00pm and 2:00pm to 4:30pm,
Monday to Friday.
PROBLEM
POSSIBLE SOLUTION
I cant get any sound
Connection leads to amplifier not made
from my CDAB-1
correctly.
Speakers not connected to amplifier.
Power of CDAB-1 or connected amplifier not
turned on.
Ensure that the CDAB-1 has been able to
locate DAB stations
Display says 'Signal N/A' Check that antenna is connected.
Ensure that DAB coverage exists in your area.
I can't access second-
At the time of publishing this manual not
ary services
many secondary services are available, this
will increase as more DAB stations start
broadcasting. If a secondary service station
is available, the secondary indicator >> will be
displayed next to the station name.
Display has gone blank
This may occur if a broadcaster changes the
or says 'Signal N/A'
label of a service or removes a label whilst
you are listening to it. The CDAB-1 will try to
retune to this station, or alternatively follow the
procedure for auto tune on page 12.
PROBLEM
POSSIBLE SOLUTION
I can't hear the station I
Ensure you have pressed the rotary control
have selected
knob when you have made your selection.
I hear a burbling sound
The station you are currently listening to will
on some stations
be displayed on line 1 of the LCD display,
as you scroll through the station order list
line 2 will show other station options. Press
the rotary control knob to activate your
choice. DAB like other digital media is good
at producing quality audio from a low level
signal, however if this signal level is too low a
'burbling' sound can sometimes be heard. To
reduce this try repositioning your antenna to
gain maximum signal strength, alternatively
you may wish to purchase an antenna booster
to enhance the level available to the CDAB-1.
CARE AND MAINTENANCE
To clean the CDAB-1 tuner, wipe the case with a slightly moist, lint-free
cloth. Do not use any cleaning fluids containing alcohol, ammonia or
abrasives. Do not spray an aerosol at or near the tuner.
Always use original packaging if it is necessary to transport the unit at any
time.
If this unit is used in a dusty environment, it may be necessary to have
the unit serviced at your local dealer periodically. It is not advisable to
allow large deposits of dust to accumulate within the unit as it may prevent
adequate cooling. Similarly dust deposits which become damp can
sometimes lead to electrical problems which may cause severe damage to
the delicate electronics within this unit.
Page 14
Hide quick links:
Advertisement
