ACOUSTIC SOLUTIONS CDAB-1 Instruction Manual

Hide thumbs

Table Of Contents

Quick Links

Table of Contents

Summary of Contents for ACOUSTIC SOLUTIONS CDAB-1

Page 2: Table Of Contents
Troubleshooting Care & Maintenance Specifications Contact Details Congratulations on purchasing the Acoustic Solutions CDAB-1 DAB/FM Tuner We trust that this product will give you hours of listening pleasure, and provide years of unparalleled performance. As with any new electrical product please be patient and allow 36 hours of use before all components have acclimatized themselves with your surroundings and found their optimum working temperature.
Page 3: What Is Dab
This allows you to tune CDAB-1 by station name, which is easier than trying makes it very easy to tune. The audio quality of DAB is near that of a CD to recall frequencies.
Page 4: Safety Instructions
For your safety please observe the following information. IMPORTANT SAFETY INSTRUCTIONS • The CDAB-1 is designed to operate on AC mains supply between 220 • Read and keep these instructions available for future reference. and 240 volts, 50 Hz.
Page 5: Front Panel Controls
FRONT PANEL CONTROLS Control Preset Station + Headphone DAB/FM Autotune Info Preset Station - Stereo / Mono Power Press to select 1. POWER BUTTON. Switches mains power on/off, however please note 5. DAB/FM SELECTOR BUTTON. Press this to switch between DAB digital that mains power is still applied to this unit even though this switch may be radio and FM analogue radio.
Page 6: Front Panel Controls
REAR PANEL CONNECTIONS FRONT PANEL CONTROLS music, varied speech etc), Stereo/Mono and bit rate of broadcast, Multiplex 11. ANALOGUE AUDIO OUTPUTS. For connection to line input sockets on name (name of multiplex broadcaster), time & date. Please note that this amplifiers.
Page 7: Remote Control Functions
Function VOL+ A remote conrol is supplied with the CDAB-1 unit, this remote is shared between the CDAB-1 and the CAMP1 ( DAB/FM Tuner ) with the DAB controls on the top half of the remote ( as shown ).
Page 8 Like all electrical devices this tuner will generate a modest amount of heat. The cooling of this device is reliant upon the flow of air within the case. Care CDAB-1 should be taken not to cover this unit with such items as rugs, covers or curtains which will restrict this air flow and may cause over heating.
Page 9 Also for use in marginal or poor signal areas. This type is directional and has a high gain. Like a TV or FM aerial, this type of antenna needs to point CDAB-1 at a transmitter. Installation requires someone to move the aerial whilst you monitor the signal strength.
Page 10 If no services are located, please check that the antenna connection is correct. It is possible to attempt to tune the CDAB-1 manually if no stations It is not possible to interrupt this sequence as the tuner needs to have at are found after an autoscan.
Page 11 LCD will display ’Auto enter OFF’. Once the CDAB-1 has built a station list, it will retain this list in memory unless you decide to reset it. Sometimes it may be the case that a particular DAB station is not available in your area, however the station still exists in the memory of the CDAB-1.
Page 12 SETTING PRESETS E. Stereo/ mono status and broadcast bitrate The CDAB-1 is fitted with 6 preset buttons on the remote which can store F. Multiplex name: this will show the multiplex which is broadcasting the DAB stations of your choice for one-button recall operation.
Page 13 0.05MHz steps. available. AUTO STEREO/MONO AND MONO ONLY MODE It is possible to instigate returning of your CDAB-1 tuner to redefine the Using the rotary control knob, press once to change between Auto and service list of stations in your area.
Page 14 CHANGING THE PRESETS The CDAB-1 is fitted with 6 preset buttons which can store FM stations of your choice for one button recall operation. To store a FM preset: When in FM mode 1.
Page 15: Care & Maintenance
CARE AND MAINTENANCE I can’t access second- At the time of publishing this manual not To clean the CDAB-1 tuner, wipe the case with a slightly moist, lint-free ary services many secondary services are available, this cloth. Do not use any cleaning fluids containing alcohol, ammonia or will increase as more DAB stations start abrasives.
Page 16: Specifications
CONTACT DETAILS SPECIFICATIONS We trust you are completely satisfied with this product from Clarity Vision (Group) Limited, however please feel free to contact us if you experience RF SECTION • Band III, 174MHz- • Band III, 87.5MHz any difficulties, or if you would like to express your views regarding our 240MHz 108MHz products.