Additional Information; Maintenance - Sony MEX-1HD Operating Instructions Manual

a ATT button
Attenuate sound.
b OFF button*
Stop playback or radio reception.
c A VOL (Volume) control
Rotate to adjust the volume.
B SOURCE control
Press to change the source.
(CD/HDD/MEMORY STICK/FM/AM/
AUX)
C ./> control
Press to:
– tune in stations automatically
– skip tracks on the disc
Press and hold to:
– find a station manually
– fast-forward/reverse a track
D DISC +/– control
Press to:
– receive preset stations
– change the album
d MODE button
Change operation (radio band)
e Infrared emitter
The rotary commander emits infrared rays in
the direction of the dial setting.
f Infrared rays dial
Rotate the dial to change the direction of
infrared rays.
* If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for
2 seconds to turn off the clock indication after tuning
off the ignition.

Additional Information

Maintenance

Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 8) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Main unit
Back of the front panel
continue to next page t
Fuse (10 A)
55